Інформація призначена тільки для фахівців сфери охорони здоров'я, осіб,
які мають вищу або середню спеціальну медичну освіту.

Підтвердіть, що Ви є фахівцем у сфері охорони здоров'я.

Журнал «Травма» Том 27, №5, 2026

Вернуться к номеру

Розподіл вертикального навантаження між опорними структурами та регіонарний напружений стан фіброзного кільця шийного відділу хребта під час згинання й розгинання: скінченно-елементне дослідження

Авторы: Слинько Є.І., Нехлопочин О.С., Фортуненко В.І., Вербов В.В., Деркач Ю.В.
Інститут нейрохірургії ім. акад. А.П. Ромоданова НАМН України, м. Київ, Україна

Рубрики: Травматология и ортопедия

Разделы: Клинические исследования

Версия для печати


Резюме

Актуальність. Дегенеративні захворювання шийного відділу хребта є однією з провідних причин хронічного болю й неврологічного дефіциту. Однією з передумов їх розвитку вважають зміну розподілу навантаження між передніми і задніми опорними структурами. Кількісна оцінка розподілу в інтактному відділі потрібна для вивчення дегенерації та планування втручань з мінімальним впливом на суміжні сегменти. Мета: оцінити розподіл навантаження між дисками, суглобами та зв’язками на рівнях C2-C3 — C6-C7 під час згинання й розгинання і зіставити внутрішньодисковий тиск із напруженим станом секторів фіброзного кільця. Матеріали та методи. Скінченно-елементну модель C0-Th1 побудовано за даними комп’ютерної томографії. До потилиці прикладали вертикальну силу 50 Н, еквівалентну вазі голови, і задавали рух від +54,9° згинання до –44,5° розгинання (176 станів). Розподіл навантаження визначали методом діаграми вільного тіла, фіброзне кільце аналізували посекторно. Результати. У навантаженому нейтральному положенні через диски передавалося від 39 % зовнішнього навантаження на C4-C5 до 77 % — на C6-C7, через дуговідросткові суглоби — 28–57 %. Суглобовий шлях переважав на C4-C5, тоді як на C2-C3 у всьому діапазоні домінував дисковий. Внутрішньодисковий тиск становив 0,147–0,294 МПа. Під час згинання суглоби розмикалися, а натяг заднього зв’язкового комплексу створював протилежну реакцію, унаслідок чого вертикальна складова дискової сили сягала приблизно подвійного зовнішнього навантаження: тиск зростав до 0,940 МПа на C5-C6. Під час розгинання більшу частину навантаження на середньо- та нижньошийних рівнях сприймали суглоби. Піковий контактний тиск зростав у 3–5 разів і досягав 10,62 МПа на C3-C4. Горизонтальна складова контактної сили становила –124,2 Н, була спрямована дозаду і відображала значну зсувну компоненту. На C5-C6 відносно низький внутрішньодисковий тиск поєднувався зі зростанням еквівалентного напруження до 8,2 МПа і максимального головного напруження розтягу в передньому секторі кільця. Глобальна відповідь моделі узгоджувалася з опублікованими даними: обсяг рухів C2-C7 становив 59,1°, максимальний реакційний момент — 2,42 Н · м. Висновки. Розподіл навантаження між опорними структурами залежить від положення голови і рівня сегмента. Ці дані можуть слугувати референтною основою для оцінювання наслідків дегенеративних змін і хірургічних втручань. Внутрішньодисковий тиск не повністю характеризує стан периферичних відділів кільця і потребує доповнення аналізом еквівалентних і головних напружень.

Background. Degenerative cervical spine disorders are one of leading causes of chronic pain and neurological deficit. Altered load distribution between the anterior and posterior support structures is considered an important biomechanical factor in their development. Quantifying load distribution in the intact spine is necessary to study degeneration and plan interventions with minimal impact on adjacent segments. The purpose was to assess load distribution between the discs, joints, and ligaments from C2-C3 to C6-C7 during flexion and extension, and to compare intradiscal pressure with the stress state of annulus fibrosus sectors. Materials and methods. A finite-element C0-Th1 cervical spine model was built from computed tomography data. A vertical 50 N force representing head weight was applied to the occiput while motion from +54.9° flexion to –44.5° extension was prescribed (176 states). Load distribution was determined using a free-body diagram, and the annulus fibrosus was analyzed by sectors. Results. In the loaded neutral position, the discs transmitted from 39 % of the external load at C4-C5 to 77 % at C6-C7, whereas the facet joints transmitted 28–57 %. The facet path dominated at C4-C5, while disc transmission dominated at C2-C3 throughout the range. Intradiscal pressure was 0.147–0.294 MPa. During flexion, the facets disengaged, and tension in the posterior ligamentous complex produced an oppo­sing reaction; consequently, the vertical component of disc-transmitted force reached approximately twice the external load: the pressure rose to 0.940 MPa at C5-C6. During extension, the facets carried most of the load at the mid- and lower-cervical levels. Peak contact pressure increased three- to fivefold and reached 10.62 MPa at C3-C4. The horizontal contact-force component was –124.2 N, directed posteriorly, and reflected substantial shear. At C5-C6, relatively low intradiscal pressure coincided with an increase in equivalent stress to 8.2 MPa and tensile maximum principal stress in the anterior annulus sector. The global model response was consistent with published data: C2-C7 range of motion was 59.1°, and the maximum reaction moment was 2.42 N · m. Conclusions. Load distribution between the support structures depends on head position and segmental level. These data may provide a reference for assessing the effects of degenerative changes and surgeries. Intradiscal pressure does not fully characterize the state of peripheral annulus and should be supplemented by equivalent and principal stress analysis.


Ключевые слова

шийний відділ хребта; скінченно-елементний аналіз; розподіл навантаження; дуговідросткові суглоби; внутрішньодисковий тиск; фіброзне кільце

cervical spine; finite element analysis; load distribution; facet joints; intradiscal pressure; annulus fibrosus


Для ознакомления с полным содержанием статьи необходимо оформить подписку на журнал.


Список литературы

1. Mansfield M, Smith T, Spahr N, Thacker M. Cervical spine radiculopathy epidemiology: A systematic review. Musculoskeletal Care. 2020;18(4):555-567. doi: 10.1002/msc.1498, PMID: 32710604.
2. Watkins RGt, Watkins RG, 3rd. Cervical Disc Herniations, Radiculopathy, and Myelopathy. Clin Sports Med. 2021;40(3):513-539. doi: 10.1016/j.csm.2021.03.006, PMID: 34051944.
3. Woods BI, Hilibrand AS. Cervical radiculopathy: epidemio–logy, etiology, diagnosis, and treatment. J Spinal Disord Tech. 2015;28(5):E251-259. doi: 10.1097/BSD.0000000000000284, PMID: 25985461.
4. Balmaceno-Criss M, Singh M, Daher M, Buchbinder R, Diebo BG, Daniels AH. Degenerative Cervical Myelopathy: History, Physical Examination, and Diagnosis. Journal of Clinical Medicine. 2024;13(23). doi: 10.3390/jcm13237139, PMID: 39685599.
5. Bbenek A, Godlewski B. Anterior cervical discectomy and fusion (ACDF) with and without plating: A comparison of radiological and clinical outcomes. Adv Clin Exp Med. 2024;33(8):881-888. doi: 10.17219/acem/172062, PMID: 37767764.
6. Epstein NE, Agulnick MA. Review of anterior cervical diskectomy/fusion (ACDF) using different polyetheretherketone (PEEK) cages. Surg Neurol Int. 2022;13:556. doi: 10.25259/sni_992_2022, PMID: 36600749.
7. Xu S, Liang Y, Zhu Z, Qian Y, Liu H. Adjacent segment degeneration or disease after cervical total disc replacement: a meta-analysis of randomized controlled trials. Journal of Orthopaedic Surgery and Research. 2018;13(1):244. doi: 10.1186/s13018-018-0940-9, PMID: 30285807.
8. Hirvonen T, Hmlinen M, Konsti J, Antinheimo J, Numminen J, Siironen J, et al. Comparable long-term outcomes in patients undergoing total disc replacement or anterior cervical discectomy and noninstrumented fusion. Spine J. 2023;23(12):1817-1829. doi: 10.1016/j.spinee.2023.08.019, PMID: 37660896.
9. Bogduk N, Mercer S. Biomechanics of the cervical spine. I: Normal kinematics. Clin Biomech (Bristol). 2000;15(9):633-648. doi: 10.1016/s0268-0033(00)00034-6, PMID: 10946096.
10. Ansaripour H, Ferguson SJ, Flohr M. In Vitro Biomechanics of the Cervical Spine: A Systematic Review. J Biomech Eng. 2022;144(10). doi: 10.1115/1.4054439, PMID: 35482019.
11. Dandumahanti BP, Subramaniyam M. Biomechanical analysis of cervical spine (C2-C7) at different flexed postures. Int J Artif Organs. 2024;47(3):205-211. doi: 10.1177/03913988241229625, PMID: 38362810.
12. Jaumard NV, Bauman JA, Weisshaar CL, Guarino BB, Welch WC, Winkelstein BA. Contact pressure in the facet joint during sagittal bending of the cadaveric cervical spine. J Biomech Eng. 2011;133(7):071004. doi: 10.1115/1.4004409, PMID: 21823743.
13. Rong X, Wang B, Ding C, Deng Y, Chen H, Meng Y, et al. The biomechanical impact of facet tropism on the intervertebral disc and facet joints in the cervical spine. Spine J. 2017;17(12):1926-1931. doi: 10.1016/j.spinee.2017.07.009, PMID: 28713050.
14. Whyte T, Barker JB, Cronin DS, Dumas GA, Nolte LP, Cripton PA. Load-Sharing and Kinematics of the Human Cervical Spine Under Multi-Axial Transverse Shear Loading: Combined Experimental and Computational Investigation. J Biomech Eng. 2021;143(6). doi: 10.1115/1.4050030, PMID: 33537737.
15. Abbed KM, Coumans JV. Cervical radiculopathy: pathophysiology, presentation, and clinical evaluation. Neurosurgery. 2007;60(1 Supp1 1):S28-34. doi: 10.1227/01.Neu.0000249223.51871.C2, PMID: 17204882.
16. Carrera CX, Achilova F, Rozenfeld S, Daniels AH. Pathophysiology, diagnosis, and management of cervical disc herniation. Am J Med. 2026;139(8):979-987. doi: 10.1016/j.amjmed.2026.03.009, PMID: 41881325.
17. Daentzer D, Welke B, Baseem Ismail A, Daentzer J, Plagge J. [Cervical disc herniation : Symptomatology, diagnostics, therapy]. Orthopadie (Heidelb). 2025;54(1):26-39. doi: 10.1007/s00132-024-04582-8, PMID: 39560707.
18. Chang L, Wang H, Guo Y, Cai Z, Zhan H. Experimental and numerical analysis of biomechanical effects in cervical spine positioning rotation manipulation. Int J Numer Method Biomed Eng. 2022;38(12):e3651. doi: 10.1002/cnm.3651, PMID: 36166310.
19. James CM, Brisme JM, St-Pierre MO, Descarreaux M, Hooper TL, Nougarou F, et al. Variability of Intradiscal Pressure During Cervical Spine Posterior-Anterior Mobilization: A Cada-veric Investigation. J Manipulative Physiol Ther. 2022;45(7):522-530. doi: 10.1016/j.jmpt.2022.10.003, PMID: 36529553.
20. Pospiech J, Stolke D, Wilke HJ, Claes LE. Intradiscal pressure recordings in the cervical spine. Neurosurgery. 1999;44(2):379-384; discussion 384-375. doi: 10.1097/00006123-199902000-00078, PMID: 9932892.
21. Crawford MT, Brisme JM, St-Pierre MO, Bellot N, Sizer PS, Sobczak S. Cervical intradiscal pressure responses to end-range supine postures: a cadaveric investigation. BMC Musculoskelet Disord. 2025;26(1):1038. doi: 10.1186/s12891-025-09284-6, PMID: 41225498.
22. Bahreinizad H, Paulon GM, Wei L, Chowdhury SK. An MRI-derived head-neck finite element model. Biomech Model Mechanobiol. 2025;24(6):2195-2215. doi: 10.1007/s10237-025-02013-x, PMID: 41042433.
23. Herron MR, Park J, Dailey AT, Brockmeyer DL, Ellis BJ. Febio finite element models of the human cervical spine. J Biomech. 2020;113:110077. doi: 10.1016/j.jbiomech.2020.110077, PMID: 33142209.
24. Manickam PS, Roy S. The biomechanical study of cervical spine: A Finite Element Analysis. Int J Artif Organs. 2022;45(1):89-95. doi: 10.1177/0391398821995495, PMID: 33645324.
25. Yoganandan N, Kumaresan S, Voo L, Pintar FA. Finite element applications in human cervical spine mode-ling. Spine (Phila Pa 1976). 1996;21(15):1824-1834. doi: 10.1097/00007632-199608010-00022, PMID: 8855470.
26. Ayturk UM, Puttlitz CM. Parametric convergence sensitivity and validation of a finite element model of the human lumbar spine. Comput Methods Biomech Biomed Engin. 2011;14(8):695-705. doi: 10.1080/10255842.2010.493517, PMID: 21229413.
27. Brolin K, Halldin P. Development of a finite element mo–del of the upper cervical spine and a parameter study of ligament characteristics. Spine (Phila Pa 1976). 2004;29(4):376-385. doi: 10.1097/01.brs.0000090820.99182.2d, PMID: 15094533.
28. Buchweitz N, Sun Y, Kelley J, Porto SC, Wang S, Reitman CA, et al. Characterizing the Baseline Regional Biphasic Mechanical Properties of Cervical Intervertebral Discs. Ann Biomed Eng. 2025;53(9):2333-2345. doi: 10.1007/s10439-025-03759-2, PMID: 40399746.
29. Buchweitz N, Sun Y, Porto SC, Wang S, Reitman CA, Yao H, Wu Y. Characterizing baseline fixed charge density in human cervical intervertebral discs. J Biomech. 2025;181:112554. doi: 10.1016/j.jbiomech.2025.112554, PMID: 39892283.
30. Cortes DH, Jacobs NT, DeLucca JF, Elliott DM. Elastic, permeability and swelling properties of human intervertebral disc tissues: A benchmark for tissue engineering. J Biomech. 2014;47(9):2088-2094. doi: 10.1016/j.jbiomech.2013.12.021, PMID: 24438768.
31. Ha SK. Finite element modeling of multi-level cervical spinal segments (C3-C6) and biomechanical analysis of an elastomer-type prosthetic disc. Med Eng Phys. 2006;28(6):534-541. doi: 10.1016/j.medengphy.2005.09.006, PMID: 16278091.
32. Ivancic PC, Coe MP, Ndu AB, Tominaga Y, Carlson EJ, Rubin W, et al. Dynamic mechanical properties of intact human cervical spine ligaments. Spine J. 2007;7(6):659-665. doi: 10.1016/j.spinee.2006.10.014, PMID: 17998125.
33. Jacobs NT, Cortes DH, Peloquin JM, Vresilovic EJ, Elliott DM. Validation and application of an intervertebral disc finite element model utilizing independently constructed tissue-level constitutive formulations that are nonlinear, anisotropic, and time-dependent. J Biomech. 2014;47(11):2540-2546. doi: 10.1016/j.jbiomech.2014.06.008, PMID: 24998992.
34. Komeili A, Rasoulian A, Moghaddam F, El-Rich M, Li LP. The importance of intervertebral disc material model on the prediction of mechanical function of the cervical spine. BMC Musculoskelet Disord. 2021;22(1):324. doi: 10.1186/s12891-021-04172-1, PMID: 33794848.
35. Leahy PD, Puttlitz CM. The effects of ligamentous injury in the human lower cervical spine. J Biomech. 2012;45(15):2668-2672. doi: 10.1016/j.jbiomech.2012.08.012, PMID: 22939289.
36. Lee SH, Cho TH, Kwon HJ, Hong JE, Lee YH, Yang HM. An anatomical and radiological study of the tectorial membrane and its clinical implications. Sci Rep. 2022;12(1):21480. doi: 10.1038/s41598-022-25213-2, PMID: 36509799.
37. Mattucci SF, Moulton JA, Chandrashekar N, Cronin DS. Strain rate dependent properties of younger human cervical spine ligaments. J Mech Behav Biomed Mater. 2012;10:216-226. doi: 10.1016/j.jmbbm.2012.02.004, PMID: 22520433.
38. Nordberg RC, Kim AN, Hight JM, Meka RS, Elder BD, Hu JC, Athanasiou KA. Biochemical and biomechanical characterization of the cervical, thoracic, and lumbar facet joint cartilage in the Yucatan minipig. J Biomech. 2022;142:111238. doi: 10.1016/j.jbiomech.2022.111238, PMID: 35933954.
39. Osth J, Brolin K, Svensson MY, Linder A. A Female Ligamentous Cervical Spine Finite Element Model Validated for Physiological Loads. J Biomech Eng. 2016;138(6):061005. doi: 10.1115/1.4032966, PMID: 26974520.
40. Phuntsok R, Ellis BJ, Herron MR, Provost CW, Dailey AT, Brockmeyer DL. The occipitoatlantal capsular ligaments are the primary stabilizers of the occipitoatlantal joint in the craniocervical junction: a finite element analysis. J Neurosurg Spine. 2019;30(5):593-601. doi: 10.3171/2018.10.SPINE181102, PMID: 30771758.
41. Phuntsok R, Mazur MD, Ellis BJ, Ravindra VM, Brockmeyer DL. Development and initial evaluation of a finite element model of the pediatric craniocervical junction. Journal of Neurosurgery Pediatrics. 2016;17(4):497-503. doi: 10.3171/2015.8.PEDS15334, PMID: 26684768.
42. Singh N, Trajkovski A, Trajkovski J, Kunc R, Matas JFR. A Pilot Study on the Age-Dependent, Biomechanical Properties of Longitudinal Ligaments in the Human Cervical Spine. Bioengineering (Basel, Switzerland). 2025;12(1). doi: 10.3390/bioengineering12010061, PMID: 39851335.
43. Trajkovski A, Omerovic S, Hribernik M, Prebil I. Fai–lure properties and damage of cervical spine ligaments, experiments and modeling. J Biomech Eng. 2014;136(3):031002. doi: 10.1115/1.4026424, PMID: 24389891.
44. Ueno K, Liu YK. A three-dimensional nonlinear finite –element model of lumbar intervertebral joint in torsion. J Biomech Eng. 1987;109(3):200-209. doi: 10.1115/1.3138670, PMID: 3657107.
45. Wolny R, Wiczenbach T, Pachocki L, Andrzejewska-Sroka A, Sabik A, Meronk B, et al. Experimental evaluation and constitutive modelling of cervical spine ligaments under low and high strain rates. Sci Rep. 2025;15(1):40139. doi: 10.1038/s41598-025-23918-8, PMID: 41249271.
46. Yoganandan N, Kumaresan S, Pintar FA. Geometric and mechanical properties of human cervical spine ligaments. J Biomech Eng. 2000;122(6):623-629. doi: 10.1115/1.1322034, PMID: 11192384.
47. Zhang QH, Teo EC, Ng HW, Lee VS. Finite element analysis of moment-rotation relationships for human cervical spine. J Biomech. 2006;39(1):189-193. doi: 10.1016/j.jbiomech.2004.10.029, PMID: 16271604.
48. Maas SA, Ellis BJ, Ateshian GA, Weiss JA. FEBio: finite elements for biomechanics. J Biomech Eng. 2012;134(1):011005. doi: 10.1115/1.4005694, PMID: 22482660.
49. Yukawa Y, Kato F, Suda K, Yamagata M, Ueta T. Age-related changes in osseous anatomy, alignment, and range of motion of the cervical spine. Part I: Radiographic data from over 1,200 asymptomatic subjects. Eur Spine J. 2012;21(8):1492-1498. doi: 10.1007/s00586-012-2167-5, PMID: 22310883.
50. Liebsch C, Greiner-Perth AK, Vogt M, Vieres V, Jonas R, Kienle A, Wilke HJ. Intervertebral disc degeneration, age, and sex affect the range of motion of the cervical spine. Sci Rep. 2025;15(1):23540. doi: 10.1038/s41598-025-07182-4, PMID: 40604084.
51. Cripton PA, Dumas GA, Nolte LP. A minimally disruptive technique for measuring intervertebral disc pressure in vitro: application to the cervical spine. J Biomech. 2001;34(4):545-549. doi: 10.1016/s0021-9290(00)00205-0, PMID: 11266680.
52. Hattori S, Oda H, Kawai S. Cervical intradiscal pressure in movements and traction of the cervical spine. Zeitschrift fr Orthopdie und ihre Grenzgebiete. 1981;119(6):568-569.
53. Arshad R, Schmidt H, El-Rich M, Moglo K. Sensitivity of the Cervical Disc Loads, Translations, Intradiscal Pressure, and Muscle Activity Due to Segmental Mass, Disc Stiffness, and Muscle Strength in an Upright Neutral Posture. Front Bioeng Biotechnol. 2022;10:751291. doi: 10.3389/fbioe.2022.751291, PMID: 35573240.
54. Panjabi M, Dvorak J, Duranceau J, Yamamoto I, Gerber M, Rauschning W, Bueff HU. Three-dimensional movements of the upper cervical spine. Spine (Phila Pa 1976). 1988;13(7):726-730. doi: 10.1097/00007632-198807000-00003, PMID: 3194778.
55. Wilke HJ, Kienle A, Werner K, Liebsch C. Range of Motion and Neutral Zone of All Human Spinal Motion Segments: A Data Collection of 30 Years of In Vitro Experiments Performed Under Standardized Testing Conditions. JOR Spine. 2025;8(1):e70052. doi: 10.1002/jsp2.70052, PMID: 40046266.
56. Pal GP, Sherk HH. The vertical stability of the cervical spine. Spine (Phila Pa 1976). 1988;13(5):447-449. doi: 10.1097/00007632-198805000-00001, PMID: 3187688.
57. Jaumard NV, Welch WC, Winkelstein BA. Spinal facet joint biomechanics and mechanotransduction in normal, injury and degenerative conditions. J Biomech Eng. 2011;133(7):071010. doi: 10.1115/1.4004493, PMID: 21823749.
58. Skaggs DL, Weidenbaum M, Iatridis JC, Ratcliffe A, Mow VC. Regional variation in tensile properties and biochemical composition of the human lumbar anulus fibrosus. Spine (Phila Pa 1976). 1994;19(12):1310-1319. doi: 10.1097/00007632-199406000-00002, PMID: 8066509.
59. Acaroglu ER, Iatridis JC, Setton LA, Foster RJ, Mow VC, Weidenbaum M. Degeneration and aging affect the tensile behavior of human lumbar anulus fibrosus. Spine (Phila Pa 1976). 1995;20(24):2690-2701. doi: 10.1097/00007632-199512150-00010, PMID: 8747247.
60. Tao Y, Galbusera F, Niemeyer F, Samartzis D, Vogele D, Wilke HJ. Radiographic cervical spine degenerative findings: a study on a large population from age 18 to 97 years. Eur Spine J. 2021;30(2):431-443. doi: 10.1007/s00586-020-06615-0, PMID: 33025192.
61. Hussain M, Natarajan RN, An HS, Andersson GB. Patterns of height changes in anterior and posterior cervical disc regions affects the contact loading at posterior facets during mo–derate and severe disc degeneration: a poroelastic C5-C6 finite element model study. Spine (Phila Pa 1976). 2010;35(18):E873-881. doi: 10.1097/BRS.0b013e3181dc60a9, PMID: 21289493.
62. Cai XY, Sang D, Yuchi CX, Cui W, Zhang C, Du CF, Liu B. Using finite element analysis to determine effects of the motion loading method on facet joint forces after cervical disc degeneration. Comput Biol Med. 2020;116:103519. doi: 10.1016/j.compbiomed.2019.103519, PMID: 31710870.
63. Hilibrand AS, Carlson GD, Palumbo MA, Jones PK, Bohlman HH. Radiculopathy and myelopathy at segments adjacent to the site of a previous anterior cervical arthrodesis. J Bone Joint Surg Am. 1999;81(4):519-528. doi: 10.2106/00004623-199904000-00009, PMID: 10225797.
64. Lawrence BD, Hilibrand AS, Brodt ED, Dettori JR, Brodke DS. Predicting the risk of adjacent segment patho–logy in the cervical spine: a systematic review. Spine (Phila Pa 1976). 2012;37(22 Suppl):S52-64. doi: 10.1097/BRS.0b013e31826d60fb, PMID: 22885828.

Вернуться к номеру